Artificial turf installers serving Kissimmee & Central FloridaCall or text (689) 202-3710
Kissimmee Artificial TurfEst. 2024 · Kissimmee, FL

Fixing turf on Reunion's fairway-adjacent yards

Turf repair in Reunion, open seams, lifted edges, a melted spot near reflective glass, is quoted per visit as of September 2026 rather than a flat rate, since the fix depends on what's actually wrong. One repair call we get here that's less common elsewhere: turf dented or scuffed by an errant golf shot on a lot backing one of the resort's three fairways.

Reviewed by Luis Austin, owner · Last reviewed September 21, 2026

Say a stray shot leaves a compressed patch

Say a Reunion homeowner backing the Nicklaus course finds a roughly 8-inch compressed patch in the backyard turf after a ball lands hard during weekend play, along with a seam nearby that's started to peel back about a foot. A repair visit for both issues together, brushing infill back into the compressed spot and re-securing the peeling seam with fresh adhesive, is quoted from photos or a short site visit rather than a fixed menu price, since the seam condition varies more than the golf-ball dent does. Most calls like this get scheduled within the week, faster than a full installation, since the crew is working on an existing base rather than building one from scratch.

Golf-ball impact on fairway-backing lots

A lot that backs any of Reunion's three courses occasionally takes a stray shot into the yard, and turf can show a compressed dent or a scuffed patch where a ball lands hard on a section without much give underneath. That's a narrower, more local repair reason than the seam and edge failures we see everywhere, and fixing it usually means working infill back into the compressed spot and brushing the pile upright rather than replacing the section outright, unless the impact tore the backing.

Dye lots and why an exact SKU still isn't a perfect match

Turf color varies slightly between production runs even within the same product line, the way carpet or paint can shift a shade between batches, so ordering the identical model number for a Reunion repair doesn't guarantee an invisible patch. A small difference that's unnoticeable on a sample card can read as a faint rectangle once it's seamed into an existing lawn that's had a season or two of sun on it already. Placing a patch where the color break falls along a natural line, a fence shadow or a planting bed edge, does more to hide the difference than chasing an exact dye lot ever will.

Screen-enclosure edges that work loose

Turf glued along a pool cage's concrete perimeter, common across Reunion's screened lanais, can start to lift at the edge as the adhesive ages or as the concrete itself shifts slightly with seasonal temperature swings. That lifted edge is a different repair than a staked lawn perimeter coming loose in soil, since it calls for re-gluing to a clean, dry slab rather than resetting a stake, and it's worth catching early before foot traffic near the pool works the gap wider.

When a washed-out edge is the real cause of a lifted corner

A downspout emptying near a turf edge, or a grade that pitches water toward one corner of a Reunion yard instead of away from it, can erode the base right under the perimeter over a few rainy seasons, long before the visible edge itself ever lifts. What looks like a nail simply pulling loose is often that eroded gap letting the edge flex more than it should under normal foot traffic or wind. Reseating the nails without rebuilding the washed-out section underneath fixes the symptom for a matter of weeks, since the material that held them originally is no longer there to hold them again.

Reseaming without correcting the water source

A seam that opened because water was standing against it, from a low spot or a grade that never sloped away properly, will reopen again if the repair only reglues the seam without also correcting the grade underneath. On a Reunion lawn, that usually means lifting a wider area than the seam itself, regrading to restore the one to two percent slope, and recompacting before the turf goes back down. Skipping that step to save time on a single visit is the most common reason the same seam generates a second service call within a year.

Why the site visit sometimes changes the scope entirely

Once we're on site at a Reunion property and lift the corner of a suspected wrinkle or seam, the base underneath sometimes tells a different story than the surface did, a soft spot that wasn't visible in any photo, or a root that's clearly still growing under the turf. That's the point of the visit rather than quoting off photos alone: a repair scoped only for the visible symptom can miss the actual cause and fail again within a season. Confirming what's underneath before cutting anything is standard on every call, not an upsell added once the crew arrives.

Why new infill at a patch settles differently at first

Infill brushed into a fresh patch on a Reunion lawn hasn't gone through a rainy season yet, so it tends to settle and compact a little more than infill in the surrounding turf during the first few months after a repair. Checking the patch area specifically, rather than assuming it matches the rest of the lawn's infill depth, catches a thin spot early enough to top it up before it becomes visible as a slightly different shade or texture where the repair meets the older turf around it.

Seams that open under rental-home traffic

On a managed rental with steady guest turnover, the seam along a well-worn path, from a patio door to a pool gate, sees more repeated foot traffic than the same seam would in an owner-occupied yard used more lightly, which can open a taped seam faster than it would elsewhere. Reinforcing that specific seam with a stronger adhesive method during a repair visit, rather than just re-taping it the way it was originally done, tends to hold up better against the same traffic pattern going forward.

Questions people ask

Can a golf-ball dent in turf be fixed without replacing the section?

Usually yes, if the backing itself isn't torn. Working infill back into the compressed area and brushing the pile upright resolves most impact dents without cutting out and reseaming a patch.

How fast can a Reunion repair be scheduled?

Faster than a new install in most cases, since there's no base or drainage work involved, though the exact timeline depends on the scope; see the turf repair page for what we look at during a repair visit.

Tell us about the yard

Send the basics and we call back to set a time to measure. Prefer to talk? Call or text (689) 202-3710.